Name: Rolex Cosmograph Daytona (Everose, Oysterflex) 116515LN
Brand: Rolex
SKU: 116515LN

The 116515LN is the Everose gold Daytona with a ceramic bezel, produced from 2013 to 2023, combining precious metal with a material that holds color and resists scratching indefinitely. It offers the full Daytona chronograph experience, caliber 4130 included, without the waitlist theater that surrounds the steel 116500LN, and in a warmer, more formally dressed package.

What it is

Rolex introduced the 116515LN in 2013 as the Everose gold companion to the relaunched Daytona line, replacing the earlier white gold and yellow gold configurations that used aluminum bezels. The ceramic bezel was a meaningful upgrade, eliminating the fading that plagued aluminum inserts on older Daytonas. Dial options across the production run included chocolate, ivory, and several gem-set configurations; the chocolate and ivory dials on non-gem examples are the most traded.

Production ended in 2023 when Rolex introduced the updated 126515LN with a slightly larger case and revised movement.

Buying notes

Check the dial closely: chocolate dials vary in depth of color across production years, and any refinishing or restoration will show under loupe at the printing edges. The Everose case is harder to polish-away than white or yellow gold, but check the lug chamfers and bezel flanks for excessive buffing, which softens the case profile. Confirm the ceramic bezel insert is original and crack-free; ceramic cannot be lapped and repaired, only replaced.

A factory service receipt matters here because the pushers and column wheel are sensitive, and independent servicing quality varies widely on the 4130.

Market read

The chocolate dial variant consistently trades at a premium over ivory, driven by collector preference and tighter original supply. Full-set examples with box, papers, and chronometer certificate card outperform watch-only sales by a meaningful margin, more so than in the steel market where raw demand absorbs all configurations. The 116515LN trades at or near retail rather than above it, unlike the steel 116500LN, which gives buyers actual negotiating room and makes condition a real differentiator in price.

Service expectations

The caliber 4130 is a purpose-built chronograph movement with a column wheel and vertical clutch, and Rolex designed it for long service intervals, typically 7 to 10 years. A full factory service on the 4130 runs considerably more than a three-hand movement service given the chronograph complication; budget accordingly. A documented recent service from a Rolex service center adds real value on resale and is worth confirming before purchase.

Editorial copy is AI-drafted from primary sources and reviewed by Grail Atlas before publication. Where the text is uncertain about a fact, it says so. Email corrections@grailatlas.com if something reads wrong. Signals on this page (community, OSINT) are clearly separated from the editorial sections.

Everose Daytona on Oysterflex is the most wearable Daytona and trades at a meaningful secondary discount to the steel 116500LN, representing better value for buyers indifferent to metal.

Uncommonbest value#4 in family

Condition affects price

Pre-owned watches trade across a wide condition spectrum. These ranges are typical for the secondary market.

New Old Stock

Unworn example retaining original packaging, tags, and warranty documentation.

+30–50% vs median

Unpolished

Worn but the case has never been polished; original brushed and polished surfaces are intact.

+15–25% vs median

Polished

Case has been professionally or amateur polished at some point; edge definition is softened.

-15 to -5% vs median

Recently Serviced

Movement has been recently serviced with documented service records; case condition varies.

At median

Project

Needs service, has dial or hand issues, non-original parts, or other remediation before daily wear.

-50 to -25% vs median

Full condition grading guide →

Market price

$18,000–$26,000

gold·2026 Q2

Price trend chart coming soon

The Everose Daytona on Oysterflex trades at a clear discount to the steel 116500LN; buyers who want an automatic Daytona without the steel premium find this the most accessible Daytona in the current catalog.

Editorial estimate, 2026 Q2. Actual prices vary by condition, date, and box/papers status.

In-house manufacture caliber · caliber Rolex Cal. 4130: in-house automatic chronograph, 28,800bph, 72h PR, 44j; column-wheel, vertical clutch, integrated construction; no cam-and-lever system · 72h power reserve (3 days) · 1 other here share it

Medium-large: suits wrists 6.5 in+ (16.5 cm+)

40 mm case. Wears confidently on average to larger wrists. May overhang on slender builds.

Not yet rated

Community + OSINT signals haven’t landed for this reference yet. We don’t publish a rating against zero signal: the number would mean nothing. Editorial body + caliber + market value still surface above; ratings appear once the signal corpus does.

Search pre-owned listings

Chrono24

eBay (sold listings)

WatchBox

Authentication

The Everose Daytona is a high-value gold reference with moderate counterfeit pressure; Everose color consistency and Cal. 4130 column-wheel are the authentication anchors.

Known issues in the market

Everose gold (18k rose gold proprietary alloy) has a specific warm rose tone; over-polished examples shift toward yellow-gold in appearance.
Replica ceramic tachymeter bezels on the Daytona often show color mismatch or incorrect font weight in the graduation markings.
Oysterflex bracelet integration at the case is difficult to replicate; loose fit or uneven curvature at the lug junction indicates a counterfeit.
Sub-dial printing on the three chronograph registers must be centered and the text weight must match the dial color; replicas frequently print too thin.
Cal. 4130 column-wheel is visible through the exhibition caseback; a non-column-wheel movement or an incorrect display view is an immediate red flag.

Area	What to check	What is correct	Red flag
case	Everose gold color and hallmarks	Warm rose-gold tone consistent across case, lugs, and crown; "750" or "18K" hallmark on caseback; no color shift between brushed and polished surfaces	Yellow-gold or overly pink tone indicating incorrect alloy or heavy polishing; missing hallmarks; visible two-tone color mismatch between case components
bracelet	Oysterflex bracelet integration	Black rubber bracelet curves smoothly from lug to lug with no gap; Everose clasp integrates flush; bracelet inner metal spine visible at the clasp end	Gap between bracelet and case lugs; loose or wobbling attachment; rubber that shows obvious seams or bubbling
dial	Sub-dial printing on three registers	12 o'clock register: 12-hour counter; 9 o'clock: 30-minute counter; 6 o'clock: running seconds; text is centered, same font weight as main dial text; no overprint bleed	Off-center sub-dial text; font weight mismatch; bleed or smear under loupe; incorrect register assignment (sub-dials transposed)
crystal	Sapphire AR coating	Blue-ish multi-layer AR coating on flat sapphire crystal; no Cyclops (Daytona does not have one); clean edge bevel	Any Cyclops lens present; green-tinted or absent AR coating; scratched crystal indicating mineral glass substitute
movement	Cal. 4130 column-wheel via caseback	Exhibition sapphire caseback shows Cal. 4130; star-shaped column wheel visible at column-wheel position; "4130" text on movement; rotor signed "Rolex"	Solid caseback on claimed exhibition-back variant; lever-wheel instead of column-wheel; "Rolex" absent on rotor; Cal. 4130 text absent
crown	Crown and pusher feel	Two pushers at 2 and 4 o'clock; pushers snap crisply with no sponginess; crown triplock with three dots; all three screw down fully	Spongy or loose pushers; crown without three dots; pushers that do not return fully after depression

Common legitimate replacements

Oysterflex bracelets are replaced by Rolex service centers when worn; a replacement bracelet is legitimate but the serial should match factory records.
Exhibition sapphire casebacks are occasionally scratched and replaced; verify the caseback serial engraving matches the movement.

Expert resources: Rolex authorized service centers can authenticate Everose gold via alloy testing. The Daytona Collectors Forum and TimeZone cover 116515LN authentication extensively. XRF testing is definitive for gold content.

Authentication guide

Last reviewed June 2026

The 116515LN pairs the Everose gold case with an Oysterflex rubber bracelet and a chocolate or black dial. The Oysterflex bracelet and Everose metal are the primary inspection targets; the movement is Cal. 4130.

Known reproduction risks

toggle

HIGH RISK

Replica 116515LN watches with incorrect Oysterflex construction

Strap lacks the internal metal spine; bends uniformly like ordinary rubber
Everose color on replica cases tends toward a more orange-red than the warm rose of genuine Everose
Clasp engravings are shallow and lack crisp edges
Subdial hand length is often proportionally wrong on replica dials

The Oysterflex is difficult to reproduce convincingly. Handling the strap and feeling for the rigid spine is a rapid primary check.

MEDIUM

Chocolate dial color approximations

Replica chocolate dials tend toward flat brown rather than the warm sunburst gradient of the genuine piece
Subdial finish on replicas is often identical in shade to the main dial, lacking the slightly darker accent rings
Genuine sunburst shows a visible shift from darker center to lighter edges under a moving light source

Dial variants by era

toggle

Era	Description	Identifiers
2014 to present (chocolate dial)	Chocolate brown sunburst dial with Everose gold applied indexes and three subdials in a slightly darker chocolate. The tachymeter bezel is Cerachrom black.	Chocolate sunburst texture with distinct depth under direct light Everose gold applied baton indexes with luminous fill Black Cerachrom ceramic bezel with platinum-filled tachymeter scale Black Oysterflex strap with Everose folding clasp
2014 to present (black dial)	Black sunburst dial paired with the same Everose case and Cerachrom bezel. Less common at retail than the chocolate variant.	Deep black sunburst dial that shifts to dark gray at extreme angles Everose gold applied indexes with Chromalight fill Subdial rings in slightly lighter black than the main dial

Service part flags

toggle

Oysterflex bracelet

Original: The Oysterflex is a metal blade core encased in black elastomer, with a longitudinal spine that gives rigidity. The clasp is solid Everose with a push-button release.

Replacement tells

Flat rubber strap without the visible longitudinal spine along the outer edge
Clasp that feels hollow or rattles; the genuine piece has significant heft from solid Everose construction
Elastomer surface that peels, cracks, or feels sticky; genuine Oysterflex resists these even after years of wear
Incorrect lug width or tab alignment on the strap ends

Bezel insert

Original: Cerachrom ceramic bezel in black with a platinum-filled tachymeter scale. The Cerachrom is scratch-resistant and has a uniform matte sheen.

Replacement tells

Tachymeter numerals that appear painted or printed rather than filled with platinum
Bezel insert that shows any scratching; ceramic is effectively unscratchable by normal wear
Color inconsistency or texture difference between the bezel and the case flanks

Dial

Original: Factory-applied sunburst finish with correct Everose applied indexes. The Rolex crown and text are executed with very fine detail.

Replacement tells

Flat or dull dial without the distinct sunburst gradient visible under angled light
Applied indexes that appear glued rather than welded into the dial
Subdial text that looks pixelated or uneven at 10x magnification
Lume fill that overflows beyond the index boundaries

Case back markings

toggle

2014 to present

Solid Everose caseback -- no exhibition window
Engraved: OYSTER PERPETUAL COSMOGRAPH DAYTONA
Engraved: OFFICIALLY CERTIFIED CHRONOMETER
Rolex crown engraved at center
Reference 116515LN and serial number engraved between lugs (not on caseback)

Movement tells

toggle

Cal. 4130 uses a column-wheel chronograph; a vertical clutch mechanism is visible at 9 o'clock through any work window if opened. If a watchmaker notes a horizontal-coupling or pushpiece mechanism, the movement is not correct for this reference.
The rotor should bear the Rolex crown motif engraved on the oscillating weight; a plain or generic rotor indicates a movement swap.
Service records should note Cal. 4130 explicitly; earlier Daytona movements (Cal. 4030/4130 predecessors) or generic ETA-based movements are not correct.
The balance wheel runs at 28,800 bph; a slower beat rate indicates a different caliber.

Sources: Rolex product page; WatchUSeek Daytona forum -- movement identification threads; RolexForums -- 116515LN reference thread.