GrailAtlasAn independent mechanical watch reference
Español
Uncommon#1 in familyOfficial press photos

Live pricing is coming soon. Get notified when it is available for this reference.

Top-tier supplier movement · caliber IWC Cal. 80110: in-house automatic, 28,800bph, 44h PR, 28j; 30 x 7.3mm; Pellaton pawl winding; wheel-train layout close to the Valjoux 7750 but every major component IWC-specific; produced 2005-2016 · 44h power reserve
Large case: suits wrists 7 in+ (18 cm+)
46 mm case. A bold, statement-size wear. Best suited to larger wrists where the case sits flush.

Not yet rated

Community + OSINT signals haven’t landed for this reference yet. We don’t publish a rating against zero signal: the number would mean nothing. Editorial body + caliber + market value still surface above; ratings appear once the signal corpus does.

Search pre-owned listings

Chrono24
eBay (sold listings)
WatchBox

Authentication

The SafeDive inner bezel must rotate only counterclockwise; bidirectional rotation means the ratchet mechanism has failed.

Known issues in the market
  • SafeDive inner bezel rotating freely in both directions indicates a failed ratchet mechanism, a safety issue for dive use.
  • 2000m water resistance requires a case seal inspection if the watch has ever been opened; verify with a watchmaker before dive use.
AreaWhat to checkWhat is correctRed flag
caseSafeDive inner bezel unidirectional rotationInner bezel rotates only counterclockwise via the outer grip; positive detent engagement in the counterclockwise directionBezel rotating freely in both directions; ratchet mechanism failure; unsafe for dive use
crownScrew-down crown for 2000m water resistanceCrown screws down fully and positively; no moisture or condensation visible inside the crystalCrown not screwing down fully; any fogging or moisture inside the crystal indicating case seal failure
crystalSapphire crystal with anti-reflective coatingSapphire crystal with blue-tinted anti-reflective coating; no chips, cracks, or delaminationAny chip or crack in the crystal; delaminated anti-reflective coating appearing as circular spots
Common legitimate replacements
  • IWC rubber dive strap; factory replacements are standard and appropriate for dive use.
Expert resources: IWC Aquatimer Automatic 2000 IW358002 product documentation. IWC SafeDive system specifications.

Authentication guide

Last reviewed June 2026

The IW358002 Aquatimer Automatic 2000 has a 2000m water resistance rating, an internal dive bezel (operated from outside without compromising the case seal), and a rubber/textile strap with a wet-suit extension clasp. Cal. 80110 (in-house) powers it. The internal rotating bezel ring is the defining mechanical feature.

Known reproduction risks

toggle
MEDIUM

Replica Aquatimers with non-functional internal bezel

  • The internal bezel mechanism is complex; most replicas use either a fixed ring or a basic external rotating bezel
  • The pusher at 10 on replicas often does not couple to any bezel function
  • Dive-spec rubber construction on replicas is often thinner or less rigid than the genuine piece

Dial variants by era

toggle
EraDescriptionIdentifiers
2012 to presentBlack dial with SuperLuminova-filled Arabic hour numerals and minute indexes at 5-minute intervals. The internal bezel is visible through the dial as a rotating ring with 0-60 minute markers.
  • Internal rotating bezel ring visible at the dial perimeter
  • External pusher at 10 o'clock to engage the internal bezel rotation
  • Date at 3 o'clock
  • "AQUATIMER AUTOMATIC 2000" on the dial
  • Large crown at 3 with a screw-down seal; 2000m WR requires triple-seal construction

Service part flags

toggle
Internal bezel system

Original: The internal bezel is a rotating ring inside the case, operated by a pusher at 10 o'clock. It has 60 clicks for unidirectional minute tracking. This mechanism is more complex to produce than a standard external rotating bezel.

Replacement tells
  • A fixed bezel ring that does not rotate when the pusher is engaged
  • An external rotating bezel (common on other divers) instead of the internal mechanism
  • Pusher at 10 that presses in but does not couple to any internal mechanism
Case

Original: The Aquatimer 2000 case is substantially sized for 2000m depth rating. The case back uses a screw-in construction. The crown and all seals are critical to the rated depth.

Replacement tells
  • A pusher crown that does not screw down; 2000m WR requires a screw-down crown
  • Case that appears to use a snap-back rather than screw-in caseback
  • Scratched or damaged case back seal groove indicating improper service

Case back markings

toggle
2012 to present
  • Screw-in caseback with IWC engraving
  • Engraved: IWC SCHAFFHAUSEN with reference IW358002 and serial
  • 2000M/6600FT depth rating engraved

Movement tells

toggle
  • Cal. 80110 runs at 28,800 bph with 42 hours of power reserve. The Pellaton bidirectional winding system is standard on IWC in-house automatics.
  • Post-service, the 2000m water resistance should be pressure-tested; any IWC service center documents this. A service receipt that does not include a pressure test result is incomplete for a dive-rated reference.
Sources: IWC Aquatimer product page; WatchUSeek -- Aquatimer 2000 IW358002 thread.

You might also like

Omega Speedmaster Moonphase Chronograph (Master Chronometer) Ref. 304.33.44.52.03.001, blue dial, steel case
Omega
Speedmaster
Ref. 304.33.44.52.03.001
Omega Speedmaster Racing Master Chronometer Ref. 329.30.44.51.01.001, black dial, steel case
Omega
Speedmaster
Ref. 329.30.44.51.01.001
Seiko Prospex Sumo SPB103 Ref. SPB103J1, blue dial, steel case
Seiko
Prospex
Ref. SPB103J1
Seiko Prospex Turtle Save the Ocean SRPE93 Ref. SRPE93K1, blue dial, steel case
Seiko
Prospex
Ref. SRPE93K1
MB&F Legacy Machine Sequential EVO Ref. LM Sequential EVO, black dial, titanium case
MB&F
Legacy Machine
Ref. LM Sequential EVO
Greubel Forsey GMT Sport Ref. GMT Sport, black dial, titanium case
Greubel Forsey
GMT Sport
Ref. GMT Sport

Buying guidance

← Back to Grail Atlas