GrailAtlasAn independent mechanical watch reference
العربية

Entry to the Grand Prix d'Horlogerie de Genève is voluntary and made by the brand. An entry is a watch registered for that year's competition, not a jury verdict, and several large houses including Rolex, Patek Philippe and Omega do not take part at all.

Common#2 in familyOfficial press photos

What it was up against

Live pricing is coming soon. Get notified when it is available for this reference.

In-house manufacture caliber · caliber MB&F LM Sequential (developed with Stephen McDonnell)
Large case: suits wrists 7 in+ (18 cm+)
44 mm case. A bold, statement-size wear. Best suited to larger wrists where the case sits flush.

Not yet rated

Community + OSINT signals haven’t landed for this reference yet. We don’t publish a rating against zero signal: the number would mean nothing. Editorial body + caliber + market value still surface above; ratings appear once the signal corpus does.

Search pre-owned listings

Chrono24
eBay (sold listings)
WatchBox

Authentication

The split-seconds function must allow the two chronograph hands to split independently on the second pusher press and re-join on reset; any failure is a rattrapante mechanism fault.

Known issues in the market
  • Split-seconds (rattrapante) function is the diagnostic; hands must split independently.
  • Re-join on reset must be clean; any sticky re-join indicates a rattrapante fault.
AreaWhat to checkWhat is correctRed flag
movementRattrapante split functionTwo chronograph seconds hands split independently on second pusher pressHands do not split independently; rattrapante mechanism fault
movementRattrapante re-join on resetBoth hands re-join cleanly on reset; no sticky or misaligned re-joinSticky or misaligned re-join; rattrapante mechanism fault
caseSequential EVO case profileCase profile consistent with official LM Sequential EVO specificationCase profile variation; non-genuine or modified case
Common legitimate replacements
  • No replacements; MB and F authorized service only.
Expert resources: MB and F direct; Stephen McDonnell documentation; authorized service.

Authentication guide

Last reviewed June 2026

The LM Sequential EVO houses two independent chronograph mechanisms controlled by a split-column wheel, developed with Stephen McDonnell. Titanium sport case at 44mm. No replica exists; the twin-chronograph architecture is unique in the independent sector.

Known reproduction risks

toggle
LOW

No known replica exists. The dual-chronograph architecture with split column wheel operation is mechanically unique and cannot be replicated outside a high-level independent atelier.

  • Any example with a single chronograph display is a different reference
  • Absent or nonfunctional second chronograph mechanism is an immediate red flag

Verify both chronograph mechanisms start, stop, and reset independently before purchase.

Dial variants by era

toggle
EraDescriptionIdentifiers
2022 to presentOpen dial with the large suspended balance wheel at 12 o'clock and two separate chronograph displays visible on the dial. The column wheel for both chronographs is visible from the dial side. Available in black, white, and blue dials.
  • Two fully independent chronograph mechanisms, each with its own pushers
  • Split-column wheel architecture visible through the open dial
  • Suspended balance wheel at 12 o'clock on the LM bridge
  • Titanium case with rubber strap
  • LM Sequential EVO designation on dial

Service part flags

toggle
Column wheel and chronograph bridges

Original: The dual column wheel mechanism is the visual and functional centerpiece. Both column wheels should be visible from the dial side and operate independently.

Replacement tells
  • Asymmetric finishing on column wheel components
  • Column wheel operational on one side only
  • Evidence of lubricant overflow on bridges
Pushers

Original: Four chronograph pushers: two on each side at 2/4 and 8/10 o'clock positions, corresponding to the two independent mechanisms.

Replacement tells
  • Pusher heads with different surface finish or diameter
  • Pushers operating the wrong mechanism

Case back markings

toggle
2022 to present
  • MB&F engraving with LM Sequential EVO reference
  • Individual serial number
  • Ti (titanium) material designation
  • 80m water resistance rating

Movement tells

toggle
  • When both chronograph mechanisms are engaged simultaneously, the balance wheel amplitude should remain stable; amplitude drop under dual chronograph load points to a mainspring or service issue.
  • The MB&F McDonnell co-development movement should exhibit exceptionally clean column wheel geometry under magnification; rough or asymmetric tooth profiles indicate non-factory service.
  • MB&F service records should accompany the watch; the dual-chronograph caliber requires specialized service tooling not available outside the authorized network.
Sources: MB&F official; MB&F authorized service network.

You might also like

MB&F Legacy Machine 101 Ref. LM101, white dial, gold-rose case
MB&F
Legacy Machine
Ref. LM101
MB&F Legacy Machine Flying T Ref. LM FlyingT, black dial, gold-white case
MB&F
Legacy Machine
Ref. LM FlyingT
Omega Speedmaster Professional Ref. 310.30.42.50.01.002, black dial, steel case
Omega
Speedmaster
Ref. 310.30.42.50.01.002
Omega Seamaster Diver 300M Ref. 210.30.42.20.01.001, black dial, steel case
Omega
Seamaster
Ref. 210.30.42.20.01.001
Omega Seamaster Aqua Terra Worldtimer Ref. 220.10.43.22.03.001, blue dial, steel case
Omega
Seamaster Aqua Terra
Ref. 220.10.43.22.03.001
Tudor Pelagos FXD Ref. M25707B-0001, blue dial, titanium case
Tudor
Pelagos
Ref. M25707B-0001

Buying guidance

← Back to Grail Atlas