Condition affects price
Pre-owned watches trade across a wide condition spectrum. These ranges are typical for the secondary market.
Full condition grading guide →
Market price
The 15400ST is the most accessible entry point into the Royal Oak 41mm family and holds value well; steel examples in excellent condition with box and papers sit comfortably in the mid-twenties.
Editorial estimate, 2026 Q2. Actual prices vary by condition, date, and box/papers status.
Not yet rated
Community + OSINT signals haven’t landed for this reference yet. We don’t publish a rating against zero signal: the number would mean nothing. Editorial body + caliber + market value still surface above; ratings appear once the signal corpus does.
Search pre-owned listings
Authentication
The Royal Oak 15400 is a high-value reference with elevated counterfeit pressure; the Petite Tapisserie guilloché dial pattern depth and all-8-screw bezel torque uniformity are the primary authentication anchors.
- Petite Tapisserie dial pattern is extremely difficult to replicate at genuine quality; shallow or irregular pyramid depth is a leading fake indicator.
- All 8 bezel screws must be evenly torqued with slots at the same rotational depth; any screw with a different slot angle was tightened incorrectly, often indicating a non-authentic reassembly.
- Cal. 3120 integrated bracelet (shared with the Offshore) has a specific solid-link construction; hollow bracelet links are an immediate fake indicator.
- The "AP" logo on the crown must be a clean, crisp laser engraving; blurred or asymmetrical "AP" is a replica indicator.
- "Grande Tapisserie" and "Petite Tapisserie" are sometimes confused; the 15400 uses Petite Tapisserie (smaller pyramids); a dial with larger pyramids indicates a wrong or misrepresented dial.
| Area | What to check | What is correct | Red flag |
|---|---|---|---|
| dial | Petite Tapisserie pattern depth and regularity | Small, regular pyramidal pattern across the full dial; each pyramid casts a distinct shadow at raking light; pattern continues without interruption to the applied indices; "AP" at 6 o'clock in correct AP font | Shallow or flat pyramid tops with reduced shadow; irregular pyramid spacing; any area of the dial where the pattern appears absent or compressed; "AP" at 6 that appears printed |
| case | Eight bezel screws and slot alignment | All 8 bezel screws with slots at the same rotational angle (ideally all vertical or all at a consistent angle); screw heads sitting flush with the bezel surface; no stripped screw heads | Any screw with a noticeably different slot angle vs. the others; stripped or scarred screw heads indicating incorrect tooling; screws that are recessed below or proud of the bezel surface |
| bracelet | Integrated solid-link bracelet | Solid stainless steel links with alternating brushed and polished surfaces; integrated end links with no gap to the case; AP fold-over clasp with "AP" engraving; links do not flex laterally under pressure | Hollow-sounding links; lateral flex in the bracelet links; end-link gap to case; clasp without AP engraving; bracelet that appears thinner or shorter than expected |
| crown | "AP" crown engraving | "AP" logo laser-engraved on crown face; clean, crisp letter edges under loupe; crown pushes in and pulls out smoothly; no screw-down thread (Royal Oak crown is not screw-down) | Blurred or asymmetrical "AP"; crown that appears to have a screw-down thread; "AP" absent on crown face |
| movement | Cal. 3120 via exhibition caseback | Sapphire caseback; Cal. 3120 automatic movement; 21,600bph; 60-hour power reserve; "AP" signed rotor; "CAL 3120" text on movement; Geneva-stripe finishing on bridges | Cal. 3120 text absent; non-AP movement; rotor without AP engraving; finishing inconsistent with Geneva stripes (Côtes de Genève on genuine) |
| case | 41mm case proportions vs. 15202 Jumbo | 41mm case diameter (larger than the 39mm Jumbo 15202); lug width 21mm; case thickness approximately 9.8mm; correct proportion between case and bracelet width | Case diameter under 40mm (too small for 15400); case that looks undersized against the integrated bracelet; thickness inconsistent with Cal. 3120 height |
- Royal Oak integrated bracelet links and clasps are the most commonly replaced component on pre-owned examples.
- Exhibition casebacks can be scratched and replaced; verify the caseback serial matches the movement serial.
Authentication guide
The 15400ST was the 41mm Royal Oak from 2012 to 2022, when it was superseded by the 15500ST. Collectors should note the service history carefully on this reference, as many examples are now entering the 10-year service window. The "Grande Tapisserie" dial and integrated bracelet are the primary authentication checkpoints.






