GrailAtlasAn independent mechanical watch reference
Deutsch
Mass-produced#1 in family

Live pricing is coming soon. Get notified when it is available for this reference.

Top-tier supplier movement · caliber Breitling Cal. 13: ETA Valjoux 7750 base, Breitling-modified, 28,800bph, 42h PR, 25j; COSC-certified; used in Avenger Chrono 43 · 42h power reserve · see-through caseback
Large case: suits wrists 7 in+ (18 cm+)
43 mm case. A bold, statement-size wear. Best suited to larger wrists where the case sits flush.

Not yet rated

Community + OSINT signals haven’t landed for this reference yet. We don’t publish a rating against zero signal: the number would mean nothing. Editorial body + caliber + market value still surface above; ratings appear once the signal corpus does.

Search pre-owned listings

Chrono24
eBay (sold listings)
WatchBox

Authentication

Verify all screwed-in crown and pushers thread fully; stripped threads compromise the water-resistance design.

Known issues in the market
  • The screwed-in pushers and crown are the water-resistance mechanism; any that will not thread down fully indicate damage.
  • Cal. 13 is Valjoux 7750-based; the caseback will show the characteristic 7750 rotor which is correct.
AreaWhat to checkWhat is correctRed flag
crownScrew-down crown thread integrityCrown unscrew and rescrews fully with clean threads; no cross-threading or strippingCrown that slips or does not thread down fully; indicates stripped threads requiring case service
caseScrew-in pusher integrityBoth pushers thread in and out cleanly; function correctly when depressed after unscrewingPushers that will not thread in fully or are stuck in the unscrewed position; water resistance is not assured
casebackCal. 13 Valjoux 7750 architectureValjoux 7750 rotor and layout through exhibition caseback; Breitling signed and finished appropriatelyMovement architecture inconsistent with the 7750 family; unsigned movement
Common legitimate replacements
  • Screw-in crown and pusher gaskets require periodic replacement; factor into service cost.
  • Cal. 13 service is widely available given the Valjoux 7750 base caliber.
Expert resources: Breitling Avenger documentation at breitling.com. WatchUSeek Breitling subforum for screw-in pusher service notes and Cal. 13 identification.

Authentication guide

Last reviewed June 2026

The Avenger Chronograph 43 runs the Cal. 13, which is an ETA Valjoux 7750-derived movement finished and COSC-certified by Breitling. The Avenger is the largest and most robust Breitling chronograph case, with a pronounced crown at 9 o'clock and large screw-down pushers. The 7750-based movement is well-documented and easy to verify through the caseback.

Known reproduction risks

toggle
MEDIUM

Replicas with non-screw-down pushers, crown positioned at 3 rather than 9, and movement architecture inconsistent with the ETA 7750.

  • Pushers that press freely without unscrewing requirement
  • Crown at 3 o'clock rather than the correct 9 o'clock position
  • Day indicator absent on a stated day/date Avenger Chrono 43
  • Movement through any caseback inconsistent with ETA 7750 architecture

The crown-at-9 position and screw-down pushers are the fastest case-level tells. Both can be confirmed without any tools in seconds.

Dial variants by era

toggle
EraDescriptionIdentifiers
Avenger Chronograph 43 current production (2019 to present)43mm steel case with oversized crown at 9, screw-down pushers, three-register chronograph, date, day indicator.
  • "AVENGER" text on the dial in the correct Breitling typeface
  • "CHRONOGRAPH" and "CHRONOMETER" text confirming complication and COSC certification
  • Three sub-dials: 30-minute register at 3, running seconds at 6, 12-hour register at 9
  • Day indicator at 12 o'clock -- the Avenger Chrono 43 includes a day disc, not only date
  • Date window between 4 and 5 o'clock
  • Large screw-down pushers at 2 and 4 o'clock with prominent profile
  • Crown at 9 o'clock with the rider-tab or Breitling-signed crown guard
  • Unidirectional rotating aluminum bezel with minute scale
  • Breitling "B" logo at 12 on the dial

Service part flags

toggle
Screw-down pushers

Original: The Avenger Chrono 43 pushers are screw-down for water resistance. Each pusher must be unscrewed before use and screwed back down before water exposure. On genuine examples, the pushers have a knurled grip ring and screw with positive thread engagement.

Replacement tells
  • Pushers that press freely without any unscrewing requirement -- screw-down pushers are the specification for this reference
  • Pusher knurling that is shallow or imprecise relative to the case finishing quality
  • Pushers that do not screw back down to a fully flush position with the case
Cal. 13 (ETA 7750 base)

Original: Cal. 13 is an ETA Valjoux 7750-derived movement finished and COSC-certified by Breitling. The 7750 has a distinctive vertical bridge layout and a large rotor. Through the caseback, the 7750 architecture is immediately recognizable to anyone familiar with the movement.

Replacement tells
  • Movement visible through any caseback with bridge geometry inconsistent with ETA 7750 family documentation
  • Rotor without Breitling branding
  • Power reserve substantially below 36 hours from a fully wound state
  • Day and date mechanism absent on an example with a stated day/date complication
Crown at 9 o'clock

Original: The Avenger has its crown at 9 o'clock, not 3, consistent with the pilot watch design brief. The crown has a Breitling logo and screws down for water resistance. A crown guard or rider-tab element protects the crown depending on the specific Avenger variant.

Replacement tells
  • Crown at 3 o'clock on a stated Avenger Chronograph 43 -- the 9 o'clock position is the architectural specification
  • Crown that does not screw down: the Avenger uses a screw-down crown as a primary seal
  • Crown without Breitling logo or with a logo at incorrect scale

Case back markings

toggle
2019 to present
  • Solid caseback with Breitling Avenger designation
  • Reference A13317 (or full reference string) on the case band
  • "Swiss Made" and COSC chronometer text
  • Water resistance rating: 30 ATM / 300M
  • Serial number between the lugs

Movement tells

toggle
  • Cal. 13 (ETA 7750 base) beats at 28,800bph and is COSC-certified. A significant deviation warrants service.
  • The 42-hour power reserve is testable. A fully wound Avenger Chrono 43 should run a minimum of 36 hours.
  • ETA 7750 cam-lever chronograph actuation: the pusher feel is positive but different from the column-wheel B01. Comparing the Avenger pusher feel to a Premier B01 side by side is instructive.
  • Day disc advance should be instantaneous at midnight. The date quickset should advance with a dedicated pusher or crown function depending on the specific variant.
  • Screw-down pushers should be tested for proper engagement: screw both pushers fully down, then attempt to press them without unscrewing. They must not actuate the chronograph while screwed down.
Sources: Breitling -- Avenger Chronograph 43 specification and Cal. 13 documentation; SJX Watches -- Breitling Avenger collection introduction (2019); WatchUSeek -- Breitling Avenger authentication forum.

You might also like

Omega Speedmaster Professional Ref. 310.30.42.50.01.002, black dial, steel case
Omega
Speedmaster
Ref. 310.30.42.50.01.002
Grand Seiko Snowflake SBGA211 Ref. SBGA211, white dial, titanium case
Grand Seiko
Heritage Spring Drive
Ref. SBGA211
Grand Seiko Shunbun SBGA413 Ref. SBGA413, rose dial, steel case
Grand Seiko
Heritage Spring Drive
Ref. SBGA413
Rolex Submariner Date Ref. 126610LN, black dial, steel case
Rolex
Submariner
Ref. 126610LN
Omega Seamaster Diver 300M Ref. 210.30.42.20.01.001, black dial, steel case
Omega
Seamaster
Ref. 210.30.42.20.01.001
Tudor Black Bay GMT Ref. M79830RB-0001, black dial, steel case
Tudor
Black Bay
Ref. M79830RB-0001

Buying guidance

← Back to Grail Atlas