1997–present · 21×29mm · caliber Longines Cal. L595 -- ETA 2895-1 base, 28,800bph, 42h PR; used in DolceVita and Conquest Classic; reliable Longines automatic in rectangular case
↓3.4%eBay asking prices. Condition and box/papers status not filtered.
Down 3% over the past 90 days
Based on eBay sales, last 12 months
Condition affects price
Pre-owned watches trade across a wide condition spectrum. These ranges are typical for the secondary market.
New Old Stock
Unworn example retaining original packaging, tags, and warranty documentation.
$1,318–$1,521
+30–50% vs median
Unpolished
Worn but the case has never been polished; original brushed and polished surfaces are intact.
$1,166–$1,268
+15–25% vs median
Polished
Case has been professionally or amateur polished at some point; edge definition is softened.
$862–$963
-15 to -5% vs median
Recently Serviced
Movement has been recently serviced with documented service records; case condition varies.
$1,014
At median
Mid-tier supplier movement · caliber Longines Cal. L595 -- ETA 2895-1 base, 28,800bph, 42h PR; used in DolceVita and Conquest Classic; reliable Longines automatic in rectangular case
Small case: suits slender wrists (under 6.5 in / 16.5 cm)
21 mm case. A compact, elegant wear. Particularly at home on narrower wrists where larger cases can overhang.
Not yet rated
Community + OSINT signals haven’t landed for this reference yet. We don’t publish a rating against zero signal — the number would mean nothing. Editorial body + caliber + market value still surface above; ratings appear once the signal corpus does.
Narrow 29x21.5mm case houses a compact ETA 2895 base; caliber through caseback confirms the correct movement for this case size.
Known issues in the market
Caseback shows a larger movement than appropriate for the 29mm case; the movement has been replaced with a non-specified caliber.
Crown is stiff or binds; ETA 2895 winding mechanism in the small case is delicate and susceptible to dust ingress.
Leather strap hardware shows corrosion; the small buckle is often plated rather than solid and corrodes with sweat exposure.
Area
What to check
What is correct
Red flag
caseback
Cal. L595 (ETA 2895-1 base) confirmation
Caseback shows caliber appropriate for the 29mm case size; movement finishing matches Longines specification; rotor size fits the small case proportions
Oversized movement that does not fit cleanly within the case; movement with different caliber number than L595; non-Longines finishing
crown
Crown function in small rectangular case
Crown winds smoothly with no binding; both winding and time-setting positions are distinct and positive
Crown that binds during winding; crown that slips out of position; excessive lateral play indicating a worn stem
case
Authentication guide
Last reviewed June 2026
The smaller 29mm DolceVita, the original proportions of the family since 1997. Available in steel, yellow gold, and two-tone. Roman numerals on the dial. The integrated rectangular link bracelet is the identity anchor.
Known reproduction risks
toggle
LOW
The DolceVita 29 is affordable and uncontroversial; there is no systematic reproduction of it. Two-tone variants get misrepresented as solid gold more often than they are outright reproduced.
Solid gold hallmarks on a plated watch (different product, not a copy)
Arabic numerals instead of Roman
Non-integrated or non-matching bracelet
Date window where none is specified
Gold-plate wear is normal and expected on vintage examples; it is a condition issue, not an authenticity issue.
Case dimensions match 29x21.5mm specification; lug finishing is consistent with Longines DolceVita quality standards
Case that does not measure to the specified dimensions; lug finishing that does not match the quality standard for this reference
Common legitimate replacements
Leather straps on the small DolceVita are frequently replaced; original straps are signed and sized for the 29mm lug width.
The small crown is a common wear item; replacement crowns must match the original plating and thread specification.
Expert resources: Longines.com DolceVita 29mm documentation for caliber and case dimension specification. WatchUSeek ladies watch forum for small rectangular Longines authentication.
1997 to present
Small rectangular case with Roman numeral dial, integrated bracelet, no date on most references
White, cream, or silver dial with Roman numerals (I, II, III... XII)
29mm length, 21.5mm width case (rectangular)
Integrated rectangular-link bracelet matched to case material
No date complication on most DolceVita 29 references
Applied Longines signature
Steel, yellow gold plate, or two-tone case options
Service part flags
toggle
Bracelet
Original: Integrated rectangular-link bracelet specific to DolceVita sizing; not interchangeable with DolceVita Classic (larger format)
Replacement tells
Bracelet link profile does not match case proportions
Larger DolceVita bracelet fitted to the 29mm case
Third-party rectangular bracelet substituted
Two-tone bracelet on an all-steel reference or vice versa
Two-Tone or Gold-Plate Finish
Original: Yellow gold plate on two-tone variants is a specific thickness and coverage; not solid gold
Replacement tells
Worn-through gold plate revealing steel beneath (normal wear, not a tell for authenticity, but affects condition)
Solid gold markings on a plated watch (different reference entirely)
Dial
Original: Roman numeral applied or printed markers; no date aperture on most production
Replacement tells
Date window indicates a different DolceVita reference or dial swap
Arabic numerals (Roman is correct for DolceVita 29)
Incorrect scale or spacing of Roman numeral markers
Case back markings
toggle
1997 to present
Solid rectangular caseback, engraved with reference L5.512.4.73.9 and serial
30M water resistance engraved
Case material stamp (stainless, gold plate, or two-tone as applicable)
Movement tells
toggle
The L595 (ETA 2895-1 base) is an automatic running at 28,800 bph; the rotor should be audible on a quiet example when moved.
Power reserve 42 hours; fully wound and timed, any watch significantly under 36 hours needs mainspring work.
The rectangular case presents assembly challenges for the automatic movement; rotor scraping sounds (the rotor touching the case wall) are a known service issue and should be absent on a correctly assembled example.
Roman numeral dial spacing must be consistent and correct; Longines would not ship a dial with uneven numeral spacing. Any visible misalignment suggests a non-original or reprinted dial.
The DolceVita 29 is commonly given as a gift watch and may have engraving on the caseback; this does not affect authenticity but reduces secondary market value.
