2021–present · 35mm · caliber ETA 2804-2: automatic, 28,800bph, 38h PR, 21j; self-winding with display caseback; smaller automatic format for the 35mm case; enamel dial made in Glasgow
Live pricing is coming soon. Get notified when it is available for this reference.
Movement tier: unclassified · caliber ETA 2804-2: automatic, 28,800bph, 38h PR, 21j; self-winding with display caseback; smaller automatic format for the 35mm case; enamel dial made in Glasgow · 38h power reserve
Small case: suits slender wrists (under 6.5 in / 16.5 cm)
35 mm case. A compact, elegant wear. Particularly at home on narrower wrists where larger cases can overhang.
Not yet rated
Community + OSINT signals haven’t landed for this reference yet. We don’t publish a rating against zero signal: the number would mean nothing. Editorial body + caliber + market value still surface above; ratings appear once the signal corpus does.
Anordain Model 2 shares the brand's enamel expertise in a larger case; dial condition is paramount.
Known issues in the market
Enamel hairline cracks are the primary concern on any Anordain piece.
Area
What to check
What is correct
Red flag
dial
Enamel dial integrity
No cracks visible under magnification, even color, no lifted edges
Hairline cracks anywhere on the dial surface, uneven color or apparent repair
case
Larger Model 2 case finishing
Case finishing per Model 2 specification, sharper lugs than Model 1 due to larger case geometry
Case finishing inconsistent with Model 2 specification, evidence of buffing
Common legitimate replacements
Straps commonly replaced.
Expert resources: Anordain serial verification. Enamel inspection under magnification is essential.
Authentication guide
Last reviewed June 2026
The Model 2 is Anordain's smaller 35mm dress watch on an ETA 2804-2 automatic. Enamel dial authentication follows the same protocol; the automatic movement is the differentiator from Model 1.
Known reproduction risks
toggle
LOW
Non-enamel dial or wrong movement in 35mm Anordain case
Dial lacks enamel depth
Movement is hand-wind rather than automatic
"Made in Scotland" caseback absent
Dial variants by era
toggle
Era
Description
Identifiers
Model 2 production
35mm case, enamel dial, ETA 2804-2 automatic. Smaller and more refined than the Model 1.
Case diameter is 35mm; noticeably smaller than the Model 1
Enamel depth and texture consistent with Anordain standards
Rotor visible through caseback (automatic)
Service part flags
toggle
Dial
Original: Kiln-fired enamel, same workshop as Model 1.
Replacement tells
Flat surface, no enamel depth
No orange-peel texture under magnification
Movement
Original: ETA 2804-2 automatic.
Replacement tells
Any hand-wind movement (the Model 2 is automatic)
Different rotor design from ETA 2804-2
Case back markings
toggle
All production
"Made in Scotland" engraved
Serial number
ETA 2804-2 designation
Movement tells
toggle
ETA 2804-2 beats at 28,800 vph.
Rotor should spin freely; winding through wrist motion is confirmed by listening for the rotor.
Movement finishing is standard ETA; no special Anordain finishing is applied to the movement.
