GrailAtlasAn independent mechanical watch reference
Español
Mass-produced#4 in familyOfficial press photos

Live pricing is coming soon. Get notified when it is available for this reference.

Also uses Seiko Cal. 6R35

Seiko Prospex 1965 Diver Re-creation SPB143 Ref. SPB143J1, silver dial, steel case
Seiko
Prospex
Seiko Prospex Alpinist SPB121 Ref. SPB121J1, green dial, steel case
Seiko
Prospex
Seiko Prospex Sumo SPB103 Ref. SPB103J1, blue dial, steel case
Seiko
Prospex
Seiko Presage Sharp Edged SPB169 Ref. SPB169J1, blue dial, steel case
Seiko
Presage
Seiko Presage Sharp Edged Ref. SPB407J1, black dial, steel case
Seiko
Presage Sharp Edged
Seiko
Prospex
Large case: suits wrists 7 in+ (18 cm+)
42.7 mm case. A bold, statement-size wear. Best suited to larger wrists where the case sits flush.

Not yet rated

Community + OSINT signals haven’t landed for this reference yet. We don’t publish a rating against zero signal: the number would mean nothing. Editorial body + caliber + market value still surface above; ratings appear once the signal corpus does.

Search pre-owned listings

Chrono24
eBay (sold listings)
WatchBox

Authentication

The chapter ring bezel and Cal. 6R35 hacking function are the two non-negotiable checks on any Willard re-creation.

Known issues in the market
  • Chapter ring bezel inserts are swapped from other Prospex references; pip and numeral proportions differ per variant.
  • Cal. 6R35 hacking (seconds stop at crown pull) is sometimes defeated by debris in the setting mechanism; a non-hacking 6R35 is incorrect.
AreaWhat to checkWhat is correctRed flag
caseChapter ring bezel insert pip and numeral proportionsPip is a small filled circle with numerals at consistent spacing per the Willard reference specPip shape, size, or numeral spacing differs from factory; insert transplanted from another Prospex variant
movementCal. 6R35 hacking functionSeconds hand stops cleanly when crown is pulled to time-set positionSeconds continue running with crown pulled; hacking mechanism is defeated or missing
Common legitimate replacements
  • Chapter ring bezel inserts from other Prospex references are occasionally fitted; verify the pip and numeral spec matches the SPB149/SPB153.
Expert resources: Seiko USA product page for SPB153/SPB149. WatchUSeek Seiko forum threads comparing Willard chapter ring variants.

Authentication guide

Last reviewed June 2026

Listed as SPB149 in the catalog but the reference number resolves to SPB153J1, the 1970 Willard re-creation. The Willard is a 42.7mm cushion-adjacent case with a black dial referencing the watch worn in Apocalypse Now. Cal. 6R35 inside. The large case and distinctive dial font are the primary authentication points.

Known reproduction risks

toggle
LOW

Direct reproductions of this specific reference are uncommon. The primary risk is substitution of a similar-looking SKX or SRP-series case with an incorrect dial.

  • Dial Arabic numerals in a different font than the original bold vintage style
  • Crown at 3 rather than 4 o'clock
  • Caseback with SKX or SRPC reference number instead of SPB153

Dial variants by era

toggle
EraDescriptionIdentifiers
2020 to presentBlack dial with large Arabic numerals at 12, 6, and 9 in a bold vintage font. Lume plots are larger than on the SPB143. "PROSPEX" and "DIVER'S 200M" designation printed below the 12.
  • Black dial with bold Arabic numerals in a vintage-style font
  • Large lume plots on applied indices and numerals
  • Date window at 3, no magnifier
  • "DIVER'S 200M" designation
  • Unidirectional aluminum bezel insert with vintage-style pip at 12

Service part flags

toggle
Dial

Original: Matte black with bold numerals. The lume is heavy and occupies most of the numeral face. Original dials have consistent lume fill with no voids.

Replacement tells
  • Lume with air bubbles or voids visible under magnification
  • Incorrect font weight on the Arabic numerals (thinner or narrower than original)
  • Gloss surface instead of matte
Bezel

Original: Unidirectional aluminum insert, 120-click action. The vintage pip at 12 is a triangle, not a circle.

Replacement tells
  • Circular pip at 12 instead of triangular, indicating an incorrect or replacement insert
  • Bidirectional rotation, which does not match the Willard design
Crown

Original: Push-pull crown at 4 o'clock, consistent with the Seiko diver crown placement convention.

Replacement tells
  • Crown at 3 o'clock position, indicating a non-original case
Hands

Original: Broad sword-style hands with heavy lume fill consistent with the vintage design brief.

Replacement tells
  • Thin or needle-style hands that do not match the vintage-wide profile
  • Inconsistent lume between hands and dial indices

Case back markings

toggle
2020 to present
  • SPB153J1 reference number (the J suffix indicates Japan domestic production)
  • "DIVER'S 200M" designation
  • Seiko S medallion at the center
  • Cal. 6R35 designation

Movement tells

toggle
  • Cal. 6R35 at 28,800 bph. Verify hackability and manual winding function at purchase.
  • Power reserve is 70 hours. A fully wound example that stops before 55 hours needs a service.
  • The caseback is solid with no display function. Any display caseback is an aftermarket modification.
Sources: Seiko Prospex SPB153 product page.

You might also like

Seiko
Prospex
Ref. SPB413J1
Seiko Prospex 1965 Diver Re-creation SPB143 Ref. SPB143J1, silver dial, steel case
Seiko
Prospex
Ref. SPB143J1
Seiko Prospex Alpinist SPB121 Ref. SPB121J1, green dial, steel case
Seiko
Prospex
Ref. SPB121J1
Seiko Prospex Sumo SPB103 Ref. SPB103J1, blue dial, steel case
Seiko
Prospex
Ref. SPB103J1
Seiko Prospex Turtle Save the Ocean SRPE93 Ref. SRPE93K1, blue dial, steel case
Seiko
Prospex
Ref. SRPE93K1
Seiko Prospex Marinemaster 300M SPB183J1 Ref. SPB183J1, blue dial, steel case
Seiko
Prospex
Ref. SPB183J1

Buying guidance

← Back to Grail Atlas