GrailAtlasAn independent mechanical watch reference
العربية
Common#1 in familyOfficial press photos

Live pricing is coming soon. Get notified when it is available for this reference.

In-house manufacture caliber · caliber MB&F HM11 (in-house, designed with Eric Giroud)
Medium-large: suits wrists 6.5 in+ (16.5 cm+)
42 mm case. Wears confidently on average to larger wrists. May overhang on slender builds.

Not yet rated

Community + OSINT signals haven’t landed for this reference yet. We don’t publish a rating against zero signal: the number would mean nothing. Editorial body + caliber + market value still surface above; ratings appear once the signal corpus does.

Search pre-owned listings

Chrono24
eBay (sold listings)
WatchBox

Authentication

The HM11 case profile must match the official MB and F Architect specification exactly; any variation is a non-genuine piece.

Known issues in the market
  • MB and F serial numbers are tracked; verify with MB and F directly for any secondary market purchase.
  • Case profile variation is the key tell on MB and F pieces.
AreaWhat to checkWhat is correctRed flag
caseHM11 Architect case profileCase profile consistent with official MB and F HM11 Architect specificationAny case profile variation; non-genuine piece
movementIn-house caliber finishingMovement finishing consistent with MB and F house standardFinishing below MB and F standard; non-genuine or modified movement
dialDisplay configurationDisplay configuration consistent with official HM11 specificationDisplay inconsistency; non-genuine configuration
Common legitimate replacements
  • No service-compatible replacements; MB and F service only.
Expert resources: MB and F direct serial number verification; MB and F authorized service.

Authentication guide

Last reviewed June 2026

The HM11 Architect is a skeletonized horological machine with a transparent architectural structure designed with Eric Giroud. Titanium or rose gold case at 42mm. The movement is visible from all angles; no conventional dial exists.

Known reproduction risks

toggle
LOW

No known replica. The open architecture requires precision machining of every visible component to MB&F tolerance; no replica supply chain could produce this.

  • Any HM11 with a solid dial plate is not authentic
  • Case dimensions: 42mm diameter, 22mm height; significant deviations indicate a non-genuine case

The primary risk with any HM is purchasing a heavily worn example without service history, not reproduction.

Dial variants by era

toggle
EraDescriptionIdentifiers
2023 to presentNo dial in the traditional sense. The HM11 presents an open-casework movement with sapphire crystal on multiple sides. Time is read via two subdials visible through the sapphire apertures. Available in titanium and rose gold.
  • Open skeleton architecture with no solid dial plate
  • Multiple sapphire crystals offering lateral and top views of the movement
  • HM11 designation visible on the movement frame
  • Two subdials for hours and minutes floating within the skeletonized structure
  • Power reserve indicator integrated into the movement architecture

Service part flags

toggle
Movement frame and bridges

Original: The HM11 frame is the structural and aesthetic element of the watch. Bridges are chamfered and polished, with the level of finishing visible from all directions.

Replacement tells
  • Bridges with tool marks or inconsistent bevel finish
  • Movement screws with rounded heads or mismatched finish
  • Sapphire crystals with visible adhesive or misaligned edges
Subdials

Original: The two subdials for hours and minutes are precision-machined and integrated into the movement architecture; they are not applied onto a dial plate.

Replacement tells
  • Subdials that appear to be applied rather than integrated
  • Printing inconsistencies on subdial surfaces

Case back markings

toggle
2023 to present
  • MB&F engraving with HM11 Architect designation
  • Individual serial number
  • Ti or 750RG material designation depending on case metal
  • 30m water resistance

Movement tells

toggle
  • The skeletonized architecture means every component is visible; any oil staining, dust accumulation, or oxidized components are immediately apparent and indicate deferred service.
  • The power reserve indicator should move smoothly as the mainspring unwinds; a jerky or stuck indicator is a service flag.
  • Given the HM11's 2023 introduction date, most examples should still be within manufacturer service tolerance.
Sources: MB&F official.

You might also like

MB&F Horological Machine No. 9 Flow Ref. 90.TL.RB, silver dial, titanium case
MB&F
Horological Machine
Ref. 90.TL.RB
Omega Speedmaster Professional Ref. 310.30.42.50.01.002, black dial, steel case
Omega
Speedmaster
Ref. 310.30.42.50.01.002
Grand Seiko Snowflake SBGA211 Ref. SBGA211, white dial, titanium case
Grand Seiko
Heritage Spring Drive
Ref. SBGA211
Grand Seiko Shunbun SBGA413 Ref. SBGA413, rose dial, steel case
Grand Seiko
Heritage Spring Drive
Ref. SBGA413
Rolex Submariner Date Ref. 126610LN, black dial, steel case
Rolex
Submariner
Ref. 126610LN
IWC Pilot Mark XVIII Ref. IW327011, black dial, steel case
IWC
Pilot
Ref. IW327011

Buying guidance

← Back to Grail Atlas