Live pricing is coming soon. Get notified when it is available for this reference.
Not yet rated
Community + OSINT signals haven’t landed for this reference yet. We don’t publish a rating against zero signal: the number would mean nothing. Editorial body + caliber + market value still surface above; ratings appear once the signal corpus does.
Search pre-owned listings
Authentication
The Portugieser Chronograph uses a Valjoux 7750-based movement with added column wheel; the sub-register layout and slim case profile are the primary authentication anchors.
- Cal. 79350 is a Valjoux 7750 with IWC column-wheel modification; a watchmaker will see the 7750 architecture, which is legitimate for this reference but often misunderstood by buyers.
- The sub-register layout follows the 7750 architecture: 12 o'clock shows 30-minute counter; 6 o'clock shows running seconds; buyers expecting a different layout have the wrong reference.
- Domed sapphire crystal on the slim case must be original; a flat replacement crystal changes the profile of the watch significantly.
- Earlier IW3714 references have slightly different case geometry than later IW371446 production; mixed case/movement generations occur on service-reassembled watches.
| Area | What to check | What is correct | Red flag |
|---|---|---|---|
| dial | Sub-register positions (7750 layout) | 30-minute chronograph counter at 12 o'clock; running seconds sub-register at 6 o'clock; no sub-register at 3 or 9; silver or black dial with railway-track minute chapter ring | Running seconds at 3 and 30-minute counter at 9 (standard 7750 layout, indicating non-IWC-modified movement); any sub-register at 9 on the claimed IW371446 |
| crystal | Domed sapphire crystal profile | Pronounced dome visible in profile; blue anti-reflective coating; dome height matches the slim case; IWC logo etching on crystal at 6 visible under polarized light | Flat crystal indicating replacement; absent or mismatched AR coating; no IWC crystal etching; crystal that sits below the case bezel level |
| movement | Cal. 79350 column wheel via caseback | Valjoux 7750 architecture with IWC column-wheel modification visible; "IWC" signed rotor; "Cal. 79350" text; 44-hour power reserve; column wheel at correct position | Standard cam-lever 7750 without column wheel (indicating a non-IWC-modified movement); "IWC" absent on rotor; Cal. 79350 text absent |
| case | Slim case proportions and pusher feel | 41mm diameter; slim profile (approximately 13mm thick); two pushers at 2 and 4 snap crisply; lug shape consistent with Portugieser family; screw-down caseback | Case thickness over 14mm; spongy pushers; lug shape inconsistent with Portugieser profile; case diameter outside 40.5-41.5mm |
| dial | IWC font and text quality | "IWC SCHAFFHAUSEN" at 12 in correct serif font; "PORTUGIESER" text below; sub-register text at correct size and weight; Arabic numeral 6 replaced by 6 o'clock sub-register | Incorrect font weight; "SCHAFFHAUSEN" absent or misspelled; sub-register text that does not match the dial color family |
- Leather straps (brown leather is most common) are regularly replaced on this reference.
- Domed sapphire crystals are sometimes replaced after impact damage; a replacement flat crystal is a condition issue worth noting.
Authentication guide
The IW371446 Portugieser Chronograph uses a silver dial with a Valjoux 7750-based Cal. 79320. The 40.9mm case has the characteristic thin lugs and thin bezel of the Portugieser family. The Portugieser is the most replicated IWC line; dial printing quality is the first inspection point.





